How to Clean Shark Vacuum Filter

An important part of keeping your Shark vacuum cleaner working effectively is ensuring there are no blockages. The primary cause of blockages is a buildup of dirt on the filters, which need to be cleaned regularly.

You may think about what makes shark vacuum cleaner filters so important.

The filters on a vacuum cleaner remove dust and allergens from the surfaces of your home. This helps to keep not only your home free of dust and dirt but also you and your family healthy.

If you don’t keep the filters clean, the buildup will cause poor performance from your cleaner. So, it is important for you to clean all filters as often as required.

But in order to perform this function, you need to know how to clean shark vacuum filter for your shark model.

In this article, we go through the shark vacuum filter cleaning instructions for a Shark rotator, navigator, and rocket. We discuss shark HEPA filter cleaning and the steps for a clean foam filter on shark vacuum.

The first step for most Shark vacuum cleaners

To begin with cleaning the filters on the Shark rotator, navigator, or rocket, you need to remove the dust canister from the machine and empty it. This can usually be done by using two fingers to lift the canister release buttons.

Once the dust canister has been removed and cleaned, you can access the main filters and move on to the cleaning steps for your Shark model.

Shark Rotator

Once you have removed all the filters from your shark rotator vacuum, your next step is to clean them.

Shark Rotator cleaning instructions 

If while cleaning the filters and they tear or break, or you cannot wait for them to dry. Replacement filters for the shark rotator are easy to buy.

Shark Navigator

Remember: with the shark lift away filter cleaning, it is important to give all wet filters at least twenty-four hours drying time before inserting them back in the cleaner.

Shark Rocket

Before you begin with your shark rocket vacuum filter cleaning, disconnect the hose from the vacuum and remove the dirt cup.

Now that you know the shark vacuum filter placement, how to remove and clean the filters, your next question might be how often should you perform the shark filter cleaning process.

When and how many times a year should you clean the different filters? 

For different filters of different shark models, the intervals between cleaning may vary.

For Example, for the Shark rotator and navigator, the recommended time for cleaning the filters is every 3 months. But with the Shark rocket, many have advised cleaning the filters on a monthly basis.

There are also other factors that you should consider before deciding on when to clean the filters

The process for how to clean shark vacuum filter is quite simple. However, with the different Shark models, removing and cleaning the different filters may differ a little. Follow the easy instructions we have provided you with or you can also check the user manual for further advice.

You Might Also Like: